12" X 6" rectangular gas fire pit ring made of the highest quality stainless steel. Our burner holes are drilled instead of punched. They are much more accurate and don't leave debris inside the tube that can cause a whistle. Our welding is machine done so parts go together more accurately and the welds are much neater. The gas transfer tubes that go from the hub to the rings are slanted upward toward the hub so water does not collect and run down into the valve if the installation has one. The gas transfer tube/hub construction is better; more gas gets to the rings so our flames are larger.
- 14" max center flame height
- 304 stainless steel fire ring burner with .065" wall thickness
- Up To 90,000 BTU
- 1/2" Female Pipe Hub
- Can Be Used With Propane or Natural Gas
What To Know When Building A Fire Pit Enclosure