Space-saving efficiency and top-mounted controls make the SR-10 the outstanding heaters to add radiant heat to your smaller rooms. Where local codes permit the SR-10T for bedrooms. For added convenience, model SR-10T is equipped with a thermostat control. Made in the USA.
Here is how the thermostat works:
The SR-10T has an input of 10,000 BTU. The hydraulic thermostat bulb is located at the casing assembly bottom. When the hydraulic thermostat bulb senses the need for heat, the unit cycles ON at a full input rate of 10,000 BTU. The unit remains at this full input rate until the hydraulic thermostat bulb is "satisfied." When the hydraulic thermostat bulb is satisfied the burner will shut OFF with the pilot flame remaining ON.
The burner does not modulate between ON and the pilot flame. When the SR-10T is on, the ceramic plaque will glow.
The LO and HI setting has temperature range of approximately 55°F to 90°F respectively. This is the temperature at the hydraulic thermostat bulb not the room temperature. The owner is advised to determine the particular heat setting that is desired for comfort, as heating requirements are different for every owner.
Features:
- 99.9 Percent Efficient
- 10K BTU Infrared Radiant Burner
- Auto Shut-off Safety Control
- Hydraulic Thermostatic Control
- Matchless Piezo Ignition
- Available for Propane or Natural Gas
- No Electricity Required For Heat
- Mounts on Wall or Floor with optional floor stand
- Optional Automatic Thermostat Controlled Blower
- White Exterior Color
- 5-year Limited Warranty
- Made in USA
